AFTER-SALE-SERVICE

Customer first, service attentively

Precautions for the operation of LCD module LCM

Date:

2014-07-11

Number of hits:

One. Precautions for LCM Operation


1. Your hands should be placed in a horizontal center position to prevent the panel from slipping off (the face-up product may be damaged)

2. The cushion should be placed on the workbench where the LCM panel is placed

3. Please do not touch the corner area of LCM

4. Do not touch the display area (do not touch the display area with your fingers when moving the LCM)

5. When the LCM is placed on the workbench, the panel part does not touch the workbench (the bottom should land first)

6. LCM should be covered with a cushion to prevent damage to the panel when placed face down

7. If the face is facing up when the LCM is placed, be careful that the back of the panel is damaged

8. When placing, be careful that the corners of the panel are damaged


Second, the aluminum packaging removal process


1. Remove the top cover of the box

2. Two people lift the panel from both sides while removing the top box cover

3. Tear off the tape on the packaging

4. Two people lift out the panel with one hand and hold it with the other hand

5. After the LCM is completely taken out, grab the right side of the panel with one hand and the bottom of the panel with the other hand (do not grab the corners)

6. Two people lift up the panel together and keep the panel upright (hold the central area at the bottom of the LCM to prevent it from falling)

7. Place the LCM lightly on the cushion, and be careful not to squeeze the panel too hard during the movement (still grasp the bottom area of the LCM to prevent it from falling during this process)

8. Two people each hold the panel with one hand, and gently remove the package from top to bottom with the other hand (when removing the aluminum package, please do not lift the LCM, if you lift it, the panel may be damaged)

9. When the LCM is placed, the face is up and the workbench is covered with a cushion to prevent the panel from slipping off


Third, the mobile process


1. Two people work together to set up the LCM panel, and one hand grasps the upper center area (C-PCB board shell protection area)

2. Keep the LCM upright, and then grab the central area of the lower part of the panel with one hand and start to move (be careful not to grab the corners to prevent slipping)

3. Put the LCM lightly on the cushion, and be careful not to squeeze the panel too hard during the movement

4. Hold the upper center area of the LCM and place it horizontally on the cushion (C-PCB board shell protection area)


4. Lifting method (horizontal)


1. One person grabs both sides of the LCM and lifts it up, being careful not to drop it

2. Place the LCM lightly on the cushion, taking care not to squeeze the corner area of the panel forcefully


5. Lifting method (vertical)

1. One person grabs both sides of the LCM and lifts it up, being careful not to drop it

2. Put the LCM lightly on the cushion, taking care not to squeeze the corner area of the panel forcefully


Six, face down setting method

1. Move the LCM to a workbench with cushions to keep the LCM upright

2. Keep the LCM horizontal and upright (please refer to the section of lifting method (horizontal))

3.1) Change the grasping position with two hands

2) Lift the LCM (face directly down) and grasp the middle of the LCM

3) Place the LCM lightly on the cushion

Note: The cushion like sponge must be thicker than the thickness of the arm, do not touch the display area